OPTIFLUX 2050
OPTIFLUX 2050
Electromagnetic flowmeter for basic water and wastewater applications
- Liner materials resistant to low concentrated chemicals
- With extra isolation of electronics for use in high humidity areas
- Flange: DN25…1200 / 1…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®, Modbus
Shipping Policy
Return policy
Terms & Conditions
The OPTIFLUX 2050 is an electromagnetic flowmeter (EMF) for basic water and wastewater applications. It is suitable for all cost-effective measurements where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The EMF has a wide diameter range (DN25…1200 / 1…48") and all drinking water approvals. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity.
The OPTIFLUX 2050 features a full bore design with wear resistant liner materials. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The EMF comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the OPTIFLUX 2050 without process interruption can be carried out using the OPTICHECK service tool.
Features & Options
- Bi-directional flow measurement over a wide dynamic range
- Tropicalized electronics for use in areas with extreme humidity and chances of flooding
- Standard wet calibration
- PP or hard rubber liner: excellent chemical resistance
- Also available in customer specific constructions
- Signal converter with display or as blind version
- Tamper proof
- Full bore design: No moving parts, no wear, no pressure loss
- Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General
- All simple water and wastewater applications
Water and wastewater industry
- Abstraction and irrigation
- Monitoring of distribution networks
- Water circulation and treatment systems
- Water purification and desalination
Specifications
Depending on selected device configuration
General information
Product type | Flowmeter |
Product family name | OPTIFLUX |
Product positioning | For basic water and wastewater applications |
Measurement principle | Electromagnetic |
Measured media | Liquids |
Operating conditions
Process pressure | max. 40 barg/ 580 psig |
Process temperature | -5…+90°C/ +23…+194°F |
Materials
Liner | Hard rubber, Polypropylene (PP) |
Process connections
Flange connections | EN (1092-1): DN25…1200 ASME (B 16.5): 1…48" JIS (B 2220): 25…1000A |
Pressure rating (EN 1092-1) | PN40 |
Pressure rating (JIS B 2220) | 20k |
Pressure rating (ASME B 16.5) | Cl 300# |
Approvals/Standards
Certificates/Approvals Marine | ABS, BV, CCS, CRS, DNV, IRS, KR, LR, NK, PRS, RINA, RS |
Certificates/Approvals Potable Water | ACS, DVGW, KIWA, KTW, NSF, TZW, WRAS |
Communication
Analogue outputs | 4…20 mA |
Discrete outputs | Frequency, Pulse, Status |
Digital outputs | HART®, Modbus RTU |