OPTIFLUX 1050
search
  • OPTIFLUX 1050
  • OPTIFLUX 1050

OPTIFLUX 1050

OPTIFLUX 1050

Electromagnetic flowmeter for basic applications with conductive liquids

  • Cost-effective flow measurement of liquids (≥5 μS/cm) up to +120°C / +248°F
  • Extra isolation of electronics for use in high humidity areas
  • Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
  • 4…20 mA, pulse, frequency, status, HART®, Modbus
 

Shipping Policy

 

Return policy

 

Terms & Conditions

Overview

The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The extra isolation of the electronic device and housing makes this EMF also suitable for use in areas with extreme humidity.

The OPTIFLUX 1050 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.

Features & Options

Bi-directional flow measurement over a wide dynamic range

Lightweight and compact wafer-style ("sandwich") design for space saving installation

Reinforced PFA liner: Smooth surface, excellent chemical resistance

Full bore design: No moving parts, no wear, no pressure loss

Standard measurement accuracy: ±0.5% or ±1 mm/s of measured value (MV)

No maintenance required

On-site verification of flowmeter with OPTICHECK service tool

Typical applications

Water and wastewater industry

  • Simple water applications (potable, raw, salt water, wastewater, heated and cooled water)
  • Abstraction and irrigation
  • Water circulation and treatment systems

Agricultural industry

  • Sludge, manure, mud, slurry

Machinery and apparatus (OEM industry)

  • Batching, dosing and mixing systems
  • Compact and mobile skids
  • Chemical handling systems
  • Firefighting systems, foam mixing, control of sprinkler systems
  • Filtration systems
  • Pump wagons

Specifications

Depending on selected device configuration

General information

Product type Flowmeter
Product family name OPTIFLUX
Product positioning For safety instrumented systems
Measurement principle Electromagnetic
Contact to measured medium Yes
Measured media Liquids
Ambient temperature

-40...+60°C /
-40...+140°F
Up to +65°C / +149°F with fan
Nominal diameter / size DN2.5...DN2000 / ⅒...80"
Power supply (VAC)

85...252 VAC
Power supply (VDC)

24 VDC

Operating conditions

Process pressure max. 40 barg/
580 psig
Process temperature -40…+180°C/
-40…+356°F

Materials

Liner Ethylene tetrafluoroethylene (ETFE), Hard rubber, Perfluoroalkoxy alkane (PFA), Polytetrafluoroethylene (PTFE), Polyuretane (PUR)

Process connections

Flange connections EN (1092-1): DN2.5…2000 (larger on request)
ASME (B 16.5): ⅒…80" (larger on request)
JIS (B 2220): 2.5…1000A
Pressure rating (EN 1092-1) PN40
Pressure rating (JIS B 2220) 20k
Pressure rating (ASME B 16.5) Cl 300#, Cl 600#

Approvals/Standards

Certificates/Approvals Ex ATEX, IECEx
Certificates/Approvals Safety SIL 2/3
NAMUR compliance NE 107, NE 131, NE 21, NE 43, NE 53

Communication

Analogue outputs 4…20 mA
Discrete outputs Frequency, Pulse, Status
Digital outputs HART®

Accuracy

Accuracy (liquids)

Measuring error ±0.2% of measured value (±1 mm/s)
Accuracy (solids)

OPTIFLUX 1050
Comments (0)
No customer reviews for the moment.