OPTITEMP TRA-C61
OPTITEMP TRA-C61
Resistance (RTD) compact sensor for hygienic applications
Hygienic G½ thread with VARIVENT®, DIN 11851, SMS 1145 and other hygienic adapters
Built-in transmitter and stainless steel sheath (FDA, EC1935/2004 conform, optional IP69)
-50…+200°C / -58…+392°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TRA-C61 is a compact resistance sensor (RTD) with optional integrated transmitter for hygienic use in limited space. The temperature sensor is particularly designed for food & beverage applications. This includes the temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 μm. It complies with FDA and EC1935/2004 regulations. Its G1⁄2 thread for hygienic adapters leaves freedom of choice for the process connections. The compact RTD sensor is available with VARIVENT®, dairy screw (DIN 11851), SMS 1145 as well as different weld-in sleeves.
The OPTITEMP TRA-C61 can be used for temperature measurement of gases, liquids and vapours up to +200°C / +390°F. The compact temperature sensor features high reliability and excellent measurement stability. Its reduced sensor tip guarantees quick response time and high measurement accuracy, even with short installation lengths. The hygienic temperature sensor is resistant to cleaning agents used in CIP and SIP procedures. It is also available in a version for high-pressure jet cleaning with hot water (IP69).
Features & Options
- Hygienic resistance sensor with optional integrated analogue output (4…20 mA)
- Special sensor design with reduced tip for quick response time
- High accuracy with short installation lengths (20 mm / 0.78 in), even in small pipelines
- Modular G1⁄2 adapter system with a wide range of hygienic connections
- Optional IP69 rated version
- Vibration resistant according to IEC 60721-4-4
Typical applications
- Food and beverage industry
- Temperature measurement of beverages, dairy products or pasty food
- Temperature control in breweries (mash tun, lauter tun etc.)
- Temperature control in the sugar dissolving tank
- Temperature control before separator
- Pasteurization control
- Control of heat exchanger
- CIP temperature control
Specifications
Depending on selected device configuration
General information
| Product type | Temperature sensor |
| Product family name | OPTITEMP |
| Product positioning | For hygienic applications |
| Measurement variables | Temperature |
| Measurement principle | Resistance (RTD) |
| Measured media | Gases, Liquids, Solids |
| Assembly with thermowell | No |
| Sensor mounting | Hygienic fitting |
| Measuring insert replaceable | No |
| Measuring insert type | Non-replaceable RTD |
| RTD element type | 1 x Pt100 |
| RTD configuration | 4-wire |
| Tolerance class (according to DIN EN 60751) | A, B |
| Temperature sensor connection type option | Built-in transmitter |
| Sheath diameters | Ø6/3 mm / 0.24/0.12" |
| Sheath dimensions | |
| Mounting point | Pipe, Tank |
| Measuring point | Pipe, Tank |
Operating conditions
| Process temperature |
-50…+200°C / |
Process connections
| Thread connections |
G½ for hygienic adapters |
| Hygienic adapters | Varivent®: N Ferrule with collar (DIN 11851): DN25, DN40, DN50 Collar ferrule (DIN 11864-1A): DN40, DN50 Collar ferrule (SMS 1147): 51 mm Straight weld-in sleeve Spherical weld-in sleeve Weld-in sleeve with shoulder Collared weld-in sleeve |
Approvals/Standards
| Certificates/Approvals Hygienic | EC 1935/2004, EHEDG, FDA |
| Ingress protection | IP66/67, IP69 |
Communication
| Analogue outputs | 4…20 mA |
OPTITEMP TRA-C61
Comments (0)
No customer reviews for the moment.
OPTITEMP TRA-C61
Resistance (RTD) compact sensor for hygienic applications
Hygienic G½ thread with VARIVENT®, DIN 11851, SMS 1145 and other hygienic adapters
Built-in transmitter and stainless steel sheath (FDA, EC1935/2004 conform, optional IP69)
-50…+200°C / -58…+392°F