OPTITEMP TCA-P10
OPTITEMP TCA-P10
Thermocouple (TC) temperature assembly for standard applications
Compression fitting connection
DIN-style based on form 2, welded multipart thermowell with straight tip
-40…+600°C / +1100°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-P10 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The thermocouple assembly is available with ATEX and IECEx approvals.
Features & Options
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customized lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
Typical applications
- Standard applications with low to medium pressures and flow velocities
- Temperature measurement in pipes and tanks
- Suitable for applications where assemblies complying with DIN standards are required
- Basic measuring tasks in various industries:
- Chemical and petrochemical
- Oil and gas
- Power generation
- Machinery and apparatus / OEM
- Iron and steel
- Pulp and paper
Specifications
Depending on selected device configuration
General information
Product type | Temperature assembly |
Product family name | OPTITEMP |
Product positioning | For standard applications |
Product variants |
|
Measurement variables | Temperature |
Measurement principle | Thermocouple (TC) |
Measured media | Gases, Liquids |
Assembly with thermowell | Yes |
Temperature assembly design | DIN-style |
Thermowell type | Multipart welded |
Thermowell form (according to DIN 43772) | Form 2 |
Sensor mounting | Plug-in |
Measuring insert replaceable | Yes |
Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TC 100 |
Tolerance class (according to DIN EN 60584) | 1 |
Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
Thermocouple (TC) configuration | 1 x Type J, 1 x Type K, 2 x Type J, 2 x Type K |
Thermowell diameters | Ø10 mm / 0.39", Ø11 mm / 0.43", Ø12 mm / 0.47", Ø9 mm / 0.35" |
Thermowell tip design | Straight |
Mounting point | Pipe, Tank |
Measuring point | Pipe, Tank |
Operating conditions
Process temperature | -40…600°C/ -40…1100°F |
Materials
Wetted parts | Austenitic stainless steel (1.4404/316L), Austenitic stainless steel (1.4571/316Ti) |
Process connections
Compression fittings | Male: G1/2, G3/4 1/2 NPT |
Approvals/Standards
Certificates/Approvals Ex | ATEX, IECEx |