OPTITEMP TRA-TS52
OPTITEMP TRA-TS52
Resistance (RTD) temperature assembly for higher flow velocities and pressures
Thread connection
ASME-style, barstock thermowell with straight tip
-40…+600°C / +1100°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TRA-TS52 is a threaded RTD sensor assembly with a straight bar stock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for use in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS52 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Features & Options
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customized lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
Typical applications
- Applications with advanced requirements
- Temperature measurement of media requiring high mechanical stress resistance
- Suitable for applications where assemblies complying with ANSI standards are required
- Primarily used in the petrochemical industry, the oil and gas industry as well as in industries such as:
- Chemical
- Power generation
- Machinery and apparatus / OEM
- Iron and steel
- Pulp and paper
Specifications
Depending on selected device configuration
General information
Product type | Temperature assembly |
Product family name | OPTITEMP |
Product positioning | For higher flow velocities and pressures |
Product variants |
|
Measurement variables | Temperature |
Measurement principle | Resistance (RTD) |
Measured media | Gases, Liquids, Steam |
Assembly with thermowell | Yes |
Temperature assembly design | ASME-style |
Thermowell type | Barstock |
Sensor mounting | Screw-in |
Measuring insert replaceable | Yes |
Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TR 100 |
RTD element type | 1 x Pt100, 2 x Pt100 |
RTD configuration | 2-wire, 3-wire, 4-wire |
Tolerance class (according to DIN EN 60751) | 1/10 DIN B, A, AA, B |
Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
Thermowell diameters | Ø16 mm / 0.63" |
Thermowell tip design | Straight |
Mounting point | Pipe |
Measuring point | Pipe |
Operating conditions
Process temperature | -200…600°C/ -328…1100°F |
Materials
Wetted parts | Austenitic stainless steel (1.4404/316L), Austenitic stainless steel (1.4571/316Ti) |
Process connections
Thread connections | Male: G½, G¾, G1 ½ NPT, ¾ NPT |
Approvals/Standards
Certificates/Approvals Ex | ATEX, IECEx |