OPTITEMP TRA-H10
OPTITEMP TRA-H10
Resistance (RTD) temperature assembly for hygienic applications
Hygienic clamp or VARIVENT® connection
Non-replaceable measuring insert and stainless steel thermowell (FDA, EC1935/2004 conform)
-50…+200°C / -58…+390°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TRA-H10 is a RTD sensor assembly with hygienic clamp or VARIVENT® connection. The hygienic temperature sensor is the standard device for temperature measurement of beverages, dairy products, pasty food or pharmaceutical products from -50…+200°C / +58…+390°F. It is made of stainless steel (1.4404 / 316L) with a surface finish of the thermowell of Ra = 0.5 μm. The sensor material also withstands cleaning agents used during CIP or SIP procedures. The measuring element is placed in the tip of the tube which is filled with a heat transfer compound for fast response times and vibration resistant operation. The measuring insert with PTFE insulated wires is not replaceable.
Features & Options
- Hygienic temperature measurement of solids, liquids and gases
- Hygienic, dead-zone free stainless steel (1.4404 / 316L) design
- Surface finish of wetted parts: Ra 0.5 µm
- Standard or stainless steel connection head
- Optional temperature transmitter
- Standard and customized insertion lengths
Typical applications
- Process applications in the food and beverage industry:
- Temperature measurement of beverages, dairy products or pasty food
- Temperature control in breweries (mash tun etc.)
- Temperature control in the sugar dissolving tank
- Temperature control before separator
- Pasteurization control
- Control after the heat exchanger
- CIP temperature control
Specifications
Depending on selected device configuration
General information
Product type | Temperature assembly |
Product family name | OPTITEMP |
Product positioning | For hygienic applications |
Product variants | Standard: OPTITEMP TRA-H10 |
Measurement variables | Temperature |
Measurement principle | Resistance (RTD) |
Measured media | Gases, Liquids, Steam |
Assembly with thermowell | Yes |
Sensor mounting | Hygienic fitting |
Measuring insert replaceable | No |
Measuring insert type | Non-replaceable RTD |
RTD element type | 1 x Pt100, 2 x Pt100 |
RTD configuration | 3-wire, 4-wire |
Tolerance class (according to DIN EN 60751) | A |
Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
Sheath diameters | Ø10 mm / 0.39", Ø6 mm / 0.23" |
Thermowell tip design | Straight |
Mounting point | Pipe, Tank |
Measuring point | Pipe, Tank |
Operating conditions
Process temperature | -50…+200°C/ -58…+390°F |
Materials
Wetted parts | Austenitic stainless steel (1.4404/316L) |
Process connections
Hygienic connections | Tri-Clamp®: 1", 1½" Varivent®: N Clamp (DIN 32676): DN25, DN40 Clamp (ISO 2852): 25, 38 |
Approvals/Standards
Certificates/Approvals Hygienic | EC 1935/2004, FDA |