OPTIFLEX 7200 C – Compact version with Ø42 mm / 1.65" coaxial probe and HT extension
search
  • OPTIFLEX 7200 C – Compact version with Ø42 mm / 1.65" coaxial probe and HT extension

OPTIFLEX 7200

OPTIFLEX 7200

Guided radar (TDR) level transmitter for advanced liquid applications

Continuous level and interface measurement in process or storage tanks, reactors and pressure vessels

Extensive choice of probes for harsh process conditions

Measuring range: 0.3…60 m / 1…197 ft

-50…+250°C / -58…+482°F; -1…100 barg / -14.5…1450 psig

 

Shipping Policy

 

Return policy

 

Terms & Conditions

The OPTIFLEX  7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its large choice of probe types and materials, this level transmitter is the high-end guided radar for level and interface measurement in the chemical or oil and gas industries. It is suitable for storage or process tanks up to 60 m / 196.85 ft, containing all kind of liquids – from hydrocarbons like slop oil or benzene to solvents and acids to cooling water or condensate.

The OPTIFLEX 7200 can be used at extended temperature and pressure conditions. Various converter and electronic versions like a remote converter or a sensor extension facilitate the access to the device. The level transmitter has approvals for use in hazardous areas.

Features & Options

  • Extensive choice of probes for all applications:
    • Ø42 mm / 1.65" coaxial probe made of 316L or HC22
    • Fully TFM-T62 PTFE-coated rod
    • Special materials available on request e.g. Monel®, tantalum, titanium, duplex
  • Ceramic process seal system for demanding process conditions
  • Reversed interface measurement
  • Patented Dynamic Gas-phase Compensation (DGC) without increased blocking distance (in preparation)
  • Various converter and electronic versions to facilitate access to the device:
    • Available as compact version (C) or with remote converter (F) up to 100 m / 328 ft
    • Sensor extension with compact version (S) up to 15 m / 49.2 ft
    • Double sensor extension with remote version (D) up to 115 m / 377.3 ft
    • Horizontal or vertical housing to suit every installation
  • Converter is rotatable and removable under process conditions and compatible with all previous Guided Radar (TDR) level transmitters made by KROHNE
  • Stainless steel housing for corrosive environment
  • Weather protection - protects the converter in extreme weather conditions
  • Diagnosis functions according to NAMUR  NE 107
  • NACE design MR 0175 (ISO 15156), MR 0103 (ISO 17945) / ASME B31.3
  • SIL 2/3 (in preparation)
  • ±2 mm /±0.08" accuracy
  • Real-time clock for event logging
  • 3-year warranty

Typical applications

General

  • Level and interface measurement of liquids in storage and process applications
  • Reversed interface measurement (e.g. water / tar)
  • Installation on magnetic level indicators (MLI) or in bypass chambers

Chemical and petrochemical industry

  • Ethylene, propylene, additives, corrosion inhibitors, butadiene
  • Solvents, alcohols, acids, bases
  • Benzene, hydraulic oil, fuels, biodiesel
  • Foaming agents
  • Level control on CO2 skids

Oil and gas industry

  • Slop oil, biodiesel, benzene, fuels, lubricant oil, various other hydrocarbons
  • Liquefied gases, condensates

Power generation

  • Hydraulic oil, lubricant oil
  • Fuel control of emergency generators
  • Cooling water, condensates
  • Lime milk

Metals industry, minerals and mining industry

  • Water tar mixtures

Specifications

Depending on selected device configuration

General information

Product type Level transmitter
Product family name OPTIFLEX
Product positioning For advanced liquid applications
Measurement variables Dielectric constant, Distance, Level, Mass, Volume
Measurement principle Guided radar
Level measurement type Continuous measurement
Contact to measured medium Yes
Interface measurement Yes
Measured media Liquid/liquid interface, Liquids
Measuring range (liquids) 0.3…60 m/
0.98…196.85 ft
Probe length 0.3...60 m
0.98...196.85 ft
Probe diameter
  • Single cable Ø4 mm / 0.16"
  • Single rod Ø8 mm / 0.32"
  • Single rod Ø8 mm / 0.32" (segmented)
  • Single rod (PTFE coated) Ø10 mm / 0.39"
  • Double rod Ø8 mm / 0.32"
  • Double cable Ø4 mm / 0.16"
  • Coaxial Ø22 mm / 0.87"
  • Coaxial Ø22 mm / 0.87" (segmented)
  • Coaxial Ø42 mm / 1.65"
  • Reversed interface probe Ø10 mm / 3.9"

Operating conditions

Process pressure -1… 100 barg/
-14.5… 1450 psig
Process temperature -50…+250°C/
-58…+482°F

Materials

Gaskets Ceramic, Ethylene propylene diene monomer (EPDM), Fluoroelastomer rubber (FKM/FPM), Kalrez® 6375, Kalrez® 7075, Polytetrafluoroethylene (PTFE)
Wetted parts Austenitic stainless steel (1.4404/316L), Austenitic alloy (2.4602/Alloy 22), Ceramic, Polytetrafluoroethylene (PTFE)

Process connections

Flange connections EN (1092-1): DN25…200/
ASME (B 16.5): 1…8”/
JIS (B 2220): 40…200A
Thread connections Male:
G¾, G1, G1½
¾ NPT, 1 NPT, 1½ NPT

Approvals/Standards

Certificates/Approvals Ex ATEX, cQPSus, IECEx, INMETRO, NEPSI
Certificates/Approvals Others NACE
Certificates/Approvals Safety SIL 2
Ingress protection IP66/68, NEMA4X/6P
NAMUR compliance NE 107, NE 21, NE 43, NE 53

Communication

Analogue outputs 4…20 mA
Discrete outputs Relay
Digital outputs HART®

Accuracy

Accuracy (liquids) ±2 mm/
±0.08 in
OPTIFLEX 7200
Comments (0)
No customer reviews for the moment.