Flow Nozzle Meter
Flow Nozzle Meter
DP flowmeter for long-term stable flow measurement with reduced pressure loss
Based on ISA 1932, long radius or Venturi nozzle (acc. to ISO 5167-3 or ASME MFC-3M)
Accurate flow measurement at high flow velocities (e.g. feed water, steam, condensate, hydrocarbons, refined products, CO2, LH2)
Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, flow nozzle, process instrumentation, etc.
Shipping Policy
Return policy
Terms & Conditions
The flow nozzle meter is designed for accurate long-term stable flow measurement of liquids gases and steam, especially in high velocity applications with the risk of erosion or cavitation. Typical applications are feedwater, steam, condensate or refined products in various industries – from power plants, refineries to chemical processing facilities to oil and gas production or CCS.
Flow nozzle meters offer a low remaining pressure loss, require only short straight inlet/outlet pipe sections and have an excellent long-term stability compared to other DP flowmeters. KROHNE offers the complete flow metering solution including flow nozzle, DP transmitter, valves, accessories, engineering, testing and documentation from one single source. The flow nozzle assembly typically comes calibrated with the nozzle installed in a metering section for offering the highest accuracy.
A number of different flow nozzle types are available to meet the exact application and regulatory requirements, e.g. a throat tap long radius nozzle according to ASME PTC 6, available with flanges or butt weld pipe connections. Also calibrated meter-runs with flow conditioner, upstream and downstream pipe sections and the flow nozzle according to ASME PTC or similar standards for performance testing are available.
The sophisticated OPTIBAR DP 7060 and the OPTIBAR DP 3050 DP transmitters are the perfect companion products for this DP flowmeter solution. They are 3D linearised and ensure advanced performance even at high static pressures. The OPTIBAR DP series has an outstanding long-term stability and a low total cost of ownership with a reduced need for field calibrations.
Features & Options
- Flowmeter assembly for high requirements of accuracy and long-term stability
- Short straight inlet/outlet pipe section requirements and low remaining pressure drop
- Manufacturing and calibration capabilities up to 48"
- Special 20-point calibration at high Reynolds-numbers possible (e.g. acc. to ASME PTC)
- Reduced TCO due to minimized need for recalibration in the field through advanced 3-D linearized OPTIBAR DP transmitters
- Complete flowmeter solution with flow nozzle, DP transmitter, flow computer, valves, accessories, engineering, testing and documentation from one single source
- Redundancy available (1oo2, 2oo3)
- HART®7, Foundation fieldbus and Profibus-PA communication options
- SIL 2/3 certified versions
- Ex ia, Ex d approvals
- International references with renowned EPCs
Typical applications
- Feedwater, steam and condensate in power plants
- Performance testing according to ASME PTC 6, ISO 60953 and others
- CO2 injection
- Liquefied hydrogen (LH2)
- Refined products flow measurement
- Oil and gas production
- Measurement devices used for hydrocarbon fluids per MPMS test protocol API 22.2
- Natural gas, combustion air
Specifications
Depending on selected device configuration
General information
Product type | Flowmeter |
Product positioning | For long-term stable flow measurement with reduced pressure loss |
Nominal diameter / size | DN50...1200 / 2…48" |
Operating conditions
Process temperature | -175…+720°C/ -283…1328°F |
Materials
Measuring tube | Austenitic stainless steel (1.4571/316Ti), Alloy steel (ASTM A182 Gr. F12), Alloy steel (ASTM A182 Gr. F22), Alloy steel (ASTM A182 Gr. F91), Carbon steel (A105) |
Process connections
Flange connections |
ASME (B 16.5): 2…48" |
Other connections |
Hub flange connections |
Weld-in connections |
Butt weld ends |
Approvals/Standards
Certificates/Approvals Ex | ATEX, IECEx, NEPSI |
Certificates/Approvals Others | ISO/TR 11583, NACE, Oxygen, Pressure Equipment Directive (PED) |
Certificates/Approvals Safety | SIL 2/3 |
Design standards | ASME MFC-3M, ISO 5167-3 |
NAMUR compliance | NE 107, NE 21, NE 43, NE 53 |
Communication
Analogue outputs | 4…20 mA |
Digital outputs | FOUNDATION™ fieldbus, HART®, Profibus-PA |
Accuracy
Reference uncertainty | 0.15…0.22% |
Calibration | Gravimetric calibration with hot water, High pressure natural gas calibration, Volumetric calibration with hot water |