OPTITEMP TRA-H65
OPTITEMP TRA-H65
Resistance (RTD) temperature assembly for hygienic applications
Welded clamp connection
Stainless steel thermowell with reduced tip (3A certified, FDA, EC1935/2004 conform; optional IP69)
-50…+200°C / -58…+390°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TRA-H65 is a RTD sensor assembly with reduced thermowell and firmly welded clamp connection for applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 μm. The temperature assembly complies with FDA and EC2004/1935 regulations.
The OPTITEMP TRA-H65 features quick response time, reliability and excellent measurement stability. Its reduced sensor tip guarantees high measurement accuracy, even in small diameter pipes. The hygienic temperature sensor is also optionally available with a replaceable Pt100 measuring insert. It is resistant to cleaning agents used in CIP and SIP procedures. The RTD sensor assembly is also available in a version for high-pressure jet cleaning with hot water (IP69).
Features & Options
- Special sensor design with reduced tip for quick response time
- Also available with replaceable P100 measuring insert and welded thermowell for temperatures up to +300°C / +390°F
- With robust stainless steel connection head; optional temperature transmitter
- Firmly welded clamp connection in different sizes
- Optional IP69 rated version
- Vibration resistant according to IEC 60721-4-4
Typical applications
- Food & beverage industry
- Temperature measurement of beverages, dairy products or pasty food
- Temperature control in breweries (mash tun, lauter tun, etc.)
- Temperature control in the sugar dissolving tank
- Temperature control before separator
- Pasteurization control
- Control of heat exchanger
- CIP temperature control
Specifications
Depending on selected device configuration
General information
Product type | Temperature assembly |
Product family name | OPTITEMP |
Product positioning | For hygienic applications |
Measurement variables | Temperature |
Measurement principle | Resistance (RTD) |
Measured media | Gases, Liquids, Pastes |
Assembly with thermowell | Yes |
Sensor mounting | Hygienic fitting |
Measuring insert replaceable | Yes |
Measuring insert type | Replaceable or non-replaceable RTD |
RTD element type | 1 x Pt100 |
RTD configuration | 4-wire |
Tolerance class (according to DIN EN 60751) | A, B |
Temperature sensor connection type option | Flying wires, Temperature transmitter, Terminal block |
Thermowell diameters | Ø6/3 mm / 0.24/0.12", Ø6/4 mm / 0.24/0.16" |
Thermowell tip design | Reduced |
Mounting point | Pipe, Tank |
Measuring point | Pipe, Tank |
Operating conditions
Process temperature | Non-replaceable measuring insert: -50…+200°C/ -58…+392°F Replaceable measuring insert: -50...+300°C/ -58...+572°F |
Materials
Wetted parts | Austenitic stainless steel (1.4404/316L) |
Process connections
Hygienic connections |
Tri-Clamp®: 1", 11⁄2", 2" |
Approvals/Standards
Certificates/Approvals Hygienic | 3A, EC 1935/2004, FDA |
Ingress protection | IP66/67, IP69 |