OPTITEMP TRA-H61
OPTITEMP TRA-H61
Resistance (RTD) temperature assembly for hygienic applications
G½ thread with VARIVENT®, DIN 11851, SMS 1145 and other hygienic adapters
Stainless steel thermowell with reduced tip (FDA, EC1935/2004 conform; optional IP69)
-50…+200°C / -58…+390°F
Shipping Policy
Return policy
Terms & Conditions
The OPTITEMP TRA-H61 is a RTD sensor assembly with reduced thermowell for hygienic applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food or. It is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 μm. The temperature assembly complies with FDA and EC2004/1935 regulations.
The OPTITEMP TRA-H61 features quick response time, reliability and excellent measurement stability. Its reduced sensor tip guarantees high measurement accuracy, even in small diameter pipes. The temperature assembly is also optionally available with a replaceable Pt100 measuring insert. Its G1⁄2 thread for hygienic adapters leaves freedom of choice for the process connections. The hygienic temperature sensor is available with VARIVENT®, dairy screw (DIN 11851), SMS 1145 as well as different weld-in sleeves. It is resistant to cleaning agents used in CIP and SIP procedures. The RTD sensor assembly is also available in a version for high-pressure jet cleaning with hot water (IP69).
Features & Options
- Special sensor design with reduced tip for quick response time
- Also available with replaceable P100 measuring insert and welded thermowell for temperatures up to +300°C / +390°F
- With robust stainless steel connection head; optional temperature transmitter
- Modular G1⁄2 adapter system with a wide range of hygienic connections
- Optional IP69 rated version
- Vibration resistant according to IEC 60721-4-4
Typical applications
- Temperature measurement of beverages, dairy products or pasty food
- Temperature control in breweries (mash tun, lauter tun, etc.)
- Temperature control in the sugar dissolving tank
- Temperature control before separator
- Pasteurization control
- Control of heat exchanger
- CIP temperature control
Specifications
Depending on selected device configuration
General information
Product type | Temperature assembly |
Product family name | OPTITEMP |
Product positioning | For hygienic applications |
Measurement variables | Temperature |
Measurement principle | Resistance (RTD) |
Measured media | Gases, Liquids, Solids |
Assembly with thermowell | Yes |
Sensor mounting | Hygienic fitting |
Measuring insert replaceable | Yes |
Measuring insert type | Replaceable or non-replaceable RTD |
RTD element type | 1 x Pt100 |
RTD configuration | 4-wire |
Tolerance class (according to DIN EN 60751) | A, B |
Temperature sensor connection type option | Flying wires, Temperature transmitter, Terminal block |
Thermowell diameters | Ø6/3 mm / 0.24/0.12", Ø6/4 mm / 0.24/0.16" |
Thermowell tip design | Reduced |
Mounting point | Pipe, Tank |
Measuring point | Pipe, Tank |
Operating conditions
Process temperature | Non-replaceable measuring insert: -50…+200°C/ -58…+392°F Replaceable measuring insert: -50...+300°C/ -58...+572°F |
Materials
Wetted parts | Austenitic stainless steel (1.4404/316L) |
Process connections
Thread connections |
G½ for hygienic adapters |
Hygienic adapters | Varivent®: N Collar ferrule (DIN 11851): DN25, DN40, DN50 Collar ferrule (DIN 11864-1A): DN40, DN50 Collar ferrule (SMS 1147): 51 mm Straight weld-in sleeve Spherical weld-in sleeve Weld-in sleeve with shoulder Collared weld-in sleeve |
Approvals/Standards
Certificates/Approvals Hygienic | EC 1935/2004, EHEDG, FDA |
Ingress protection | IP66/67, IP69 |